{"id":4790,"date":"2019-04-26T08:41:55","date_gmt":"2019-04-26T13:41:55","guid":{"rendered":"https:\/\/www.summet.com\/blog\/?p=4790"},"modified":"2019-04-26T08:45:17","modified_gmt":"2019-04-26T13:45:17","slug":"banshee-sailboat-rudder-tiller-rigging","status":"publish","type":"post","link":"https:\/\/www.summet.com\/blog\/2019\/04\/26\/banshee-sailboat-rudder-tiller-rigging\/","title":{"rendered":"Banshee sailboat rudder & tiller rigging"},"content":{"rendered":"

\"\"<\/a><\/p>\n

This is my new (to me) Banshee sailing dinghy. She is 13 feet overall, and cat rigged, which means she only has a single sail behind the main mast, with no head sail. This rudder and tiller doesn’t look exactly like that shown in photos online of other Banshee boats, so it may be a later retrofit.<\/p>\n

This is how I rigged up the rudder and tiller. All of the attachment points were already there when I got the boat, but I added two bungee cords and an up-haul line. I have no idea if this is the “official” method, but it seems to work for me.<\/p>\n

First, I wrapped a 24″ bungee around the tiller and secured it to this forward eye strap with a chain link and then attached it to these pre-existing eye straps on the inside of the transom. This gives an automatic “return to center” action for the rudder.<\/p>\n

I used a 42″ yellow bungee cord wrapped in the middle around an existing bolt
\nin the front of the rudder to pull and keep the rudder down, while at the
\nsame time, allowing it to rotate backwards if ran aground. <\/p>\n

I attach the ends to this front eye strap when under way, or can move them
\nto this rear eye strap to make the rudder easier to lift. <\/p>\n

I used a 1\/8″ line tied to an existing hole in the back and of the rudder and routed around the tiller to a bottom mounted jam cleat to raise the rudder. It’s certainly possible that this jam cleat is really intended for a down-haul line, and not an up-haul line, as it’s on the bottom of the tiller. <\/p>\n

So, that’s what I’ve done, it works for me, but feel free to leave a comment if I’ve completely messed things up.<\/p>\n