First Light!

I have mounted and wired all sixty RGB LED’s under the tube support shelf. These RGB LED’s are in serial strings of 20 each, and I was able to connect them end-to-end, making the wiring much easier than the air pump motors! Each liquid filled tube in the bubble display will sit above one of the LED’s.
60 color controlled LED's mounted under the tube support shelf

Looking down through the holes in the tube support shelf, you can see each tube has a colored LED under it.

These LED’s are individually addressable by the Arduino that controls the entire system. In the video below I have them simply doing a simple color progression for testing.

2 thoughts on “First Light!

Leave a Reply to phong Cancel reply

Your email address will not be published.